- Contact Person : Ms. Dai Yi
- Company Name : Shanghai Zhong Jing Imp. & Exp. Corporation
- Tel : 86-21-65919533
- Fax : 86-21-65919233
- Address : Shanghai,Shanghai,2nd Floor, No.1 Yin Gao Road
- Country/Region : China
- Zip : 200439
CNC and Manual micro mill machine PX1
WIDELY USED IN SCHOOL for EDUCATION and FAMILY for HOBBY.
More products will be shown on our company website.
PX1 is combined with CNC and manual, so named as a 2 in 1 high precisionmill machine. Fully transparence enclosure prov ided a good outside looking. PC-Based CNC control, connect by Ethernet or Parallel port, easy set up and learning, operate simple, suitable for education and training. Without CNC, it could be used as a manual milling machine for working and trainng. Auto power off when door open, good structure, high safety and low cost, the best choice for education and training.
PX1's FEATURES
Pre-installed hand wheel
2 in 1 CNC and manual function
PC based CNC system, high reliability, operate simple
Connect with PC by network cable
G code can compatible with FANUC
Safe and reliable whole shields shell
table size 400*145mm
220V single-phase AC power supply
selection of high-quality casting materials, more compact
Safety electrical components of high quality and fast plug
CE safety certification
PX1's specification
| mode | PX1 |
| drilling capacity | 10mm |
| worktable size | 400*145mm |
| worktable T-slot size | 8mm |
| quantities of T-slots on table | 3 |
| table travel-X axis | 230mm |
| table travel-Y axis | 120mm |
| table travel-Z axis | 230mm |
| max speed of moving(X.Y.Z) | 2000mm/min |
| speed of feeding(X.Y.Z) | 500mm/min |
| throat | 140mm |
| main motor power | 500w |
| main spindle | ER16 |
| speed of the spindle | 100-20000rpm |
| motor of X axis | 1.35N.m |
| motor of Y axis | 1.35N.m |
| motor of Z axis | 1.35N.m |
| machine size | 560*680*800mm |
| packing size | 660*780*900mm |
| weight | 70/90kg |
PX1's picture
CNC and Manual micro mill machine PX1
